Sub-projects in 2021

Investigator: doc. Dr. Ing. Bohumír Čech, VSB-TUO

Partners: Brno University of Technology, Veolia Energy
Application segment 2
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Investigator: Mgr. Sylva Krčmářová, VSB-TUO

Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Investigator: doc. Ing. Petr Toman, Ph.D., Brno University of Technology

Partners: VŠB-Technical University of Ostrava, MEgA- Measuring Power Apparatus; EG.D; ČEZ Distribution, plc; EnerGoConsult ČB
Application Segment 3
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Adaptable system for protecting and monitoring networks with a large share of distributed generation
• Research on secure communication technologies for smart grids in the energy sector
• Research on the application of batteries used for electromobility in sta-tionary energy storage
• Prediction of reliability of elements during short-circuit faults in terms of dynamic effects
• Energy management of buildings with integrated hybrid systems

Investigator: prof. Ing. Zdeněk Peroutka, Ph.D., University of West Bohemia

Partners: ČEZ Distribution, plc; ENERGON Dobříš, ZAT
Application Segment 3
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Performance-related electronic technologies for distribution networks
• Management of distributed energy sources in microgrids
• Special sensors for energy networks and infrastructures

Investigator: Ing. et Ing. Markéta Kryková, Ph.D., Research Centre Řež

Partners: University of West Bohemia; Czech Technical University in Prague; Institute of Termomechanics CAS; Research and Testing Institute Pilsen, Czech Aerospace Research Centre, COMTES FHT, ČEZ, ZAT, Doosan Škoda Power
Application Segment 1
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• 3D printing of steam turbine components
• Experiments on experimental turbines
• Experiments on transonic profile grilles
• Material for geothermal turbine components
• Design of segmented bearing with polymer composition
• Optimization of operating parameters of power units and their key components-Ventilation
• Development of flutter resistant blades
• Research on complex valve systems and their optimization
• Increasing energy efficiency and reliability of power units
• Anti-erosion protection of turbine end blades
• Qualification of welded joints

Investigator: Ing. et Ing. Markéta Kryková, Ph.D., Research Centre Řež

Partners: Brno University of Technology, Czech Technical University in Prague, Research and Testing Institute Pilsen, ČEZ
Application Segment 1
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Development of advanced methods for comprehensive assessment of turbine service life
• Prospective diagnostic methods
• Pilot validation of methodologies for criticality assessment and decision making procedure on maintenance of operational data

Investigator: Ing. et Ing. Markéta Kryková, Ph.D., Research Centre Řež

Partners: VŠB-Technical University of Ostrava; University of West Bohemia; Czech Technical University in Prague; Research and Testing Institute Pilsen; COMTES FHT; ČEZ; Doosan Škoda Power; Škoda JS
Application Segment 1
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Surface treatment of components in power plants and nuclear power plants
• Inorganic materials for the nuclear industry
• HTG weld failure analysis and development of a standard procedure
• Development of composite binders for repairs of nuclear power plant equipment

Investigator: prof. Ing. Stanislav Mišák, Ph.D., VSB-TUO

Partners: Czech Technical University in Prague; EG.D; ČEZ Distribution; ELVAC
Application Segment 3
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Ratio calculation in non-standard modes of the distribution system (considering dynamic processes)
• Development of fault detector for overhead lines with insulated conductors

Investigator: doc. Dr. Ing. Tadeáš Ochodek, VSB-TUO

Partners: Czech Technical University in Prague; Institute of Chemical Process Fundamentals of the CAS;VEOLIA Energy; Vyncke
Application Segment 2
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Properties and use of slag from waste-to-energy plant
• Dynamics of the fuelbed strata on the grate
• Characterization and methodologies for determination of nanoparticles and mercury emissions from combustion processes

Investigator: Ing. et Ing. Markéta Kryková, Ph.D., Research Centre Řež

Partners: Czech Technical University in Prague; Czech Aerospace Research Centre; ČEZ; ŠKODA JS; ATEKO
Application Segment 2
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• System analyses of hydrogen technologies in the energy sector
• Advanced technologies for energy storage
• Treatment and disposal of hazardous waste in molten salt

Investigator: doc. Dr. Ing. Bohumír Čech, VSB-TUO

Partners: Czech Technical University in Prague; VEOLIA Energy; SMOLO
Application Segment 2
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Energy use of solid alternative fuels (SAF)
• Project to optimise the use of energy by-products
• Implementation of measures to achieve Best Available Techniques in the energy sector

Investigator: prof. Ing. Petr Stehlík, CSc., dr. h. c., Brno University of Technology

Partners: VEOLIA Energy
Application Segment 2
Approved by Centre Council: October 13, 2020
Approved by TA ČR: December 4, 2020

Work packages:

• Experimental verification of the fuel mixtures combustion possibility
• Study and modelling of heat transfer surfaces clogging by solid pollutants - II.
• Conceptual and comprehensive approach for operation optimisation
• Optimisation of turbine operation at reduced fuel temperature